Combined blinkers and tail lights for the 2005-2006 Kawasaki ZX-6R & ZX-6RR & 2004 - 2007 Kawasaki ZX-10R

MSRP: $150.00
Description: This is an integrated tail retrofit for the stock 2005-2006 Kawasaki ZX-6R & ZX6-RR Tail & 2004 -2007 Kawasaki ZX-10R. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 68 Ultra Bright Red LEDs and 40 Ultra Bright Yellow LEDs - compared to only 9 red LEDs on the stock circuit board.

Just as on the other models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

Combined blinkers and tail lights for the 2003-2004 Kawasaki ZX-6R & ZX-6RR

MSRP: $150.00
Description: This is an integrated tail retrofit for the stock 2003 - 2004 Kawasaki ZX-6R & ZX-6RR Tail. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 48 Ultra Bright Red LEDs and 42 Ultra Bright Yellow LEDs - compared to only 21 red LEDs on the stock circuit board.

Just as on the other models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

Custom LED 2007 -2008 Yamaha YZF-R1 Integrated LED Tail Light

MSRP: $150.00
Description: The Custom LED 2007 -2008 Yamaha YZF-R1 Integrated LED Tail Light marks the introduction of our new Brake Alert safety feature, strobe Mode and NOW FULLY complete PLUG & PLAY!

Brake Alert automatically provides three quick strobes of light the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!

Strobe Mode is a feature that puts the tail light into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time.

Also included is our Blaster-X technology. This technology squeezes the maximum possible luminance power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors. It also allows us to utilize less LEDs, thereby maintaining the factory light distribution which was previously not possible.

Just as on the other Custom LED models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

McCoy Motorsports is offering the Blaster-X as a Complete Housing now with board and Lens as easy to install Plug N Play model . The Complete Unit installs just like your factory unit right back into your stock tail section of your bike. You even get to keep your Tail Light.

NOTE: The "BlasterX" effects feature can be activated via a single toggle switch (switch, tape, connectors, and wire included in our Custom Dynamics exclusive package)

Combining the most advanced circuit boards and injected molded OEM style housings (PLUG and PLAY, ready to go), is the best setup AVAILABLE to clean up your 07's tail section!

Integrated LED Turn Signals 2001-2002 Yamaha R6 Motorcycle

MSRP: $150.00
Description: The new Custom LED 2001-2002 R6 Integrated tail has MORE LEDs and has a uniform distribution of red and yellow LEDs to uniformly light the stock lens.

This is a retrofit of a stock 2001 or 2002 R6 tail. The internal workings of the factory LED tail light are removed and replaced with our Custom LED circuit board containing 60 Ultra Bright Red LEDs and 46 Ultra Bright Yellow LEDs.

The Red LEDs function as running and brake lights (dual intensity). The yellow LEDs serve as the blinker! That's right - you're totally integrated with this tail, no need for any other rear blinkers. To prevent color mixing and to create a dramatic effect, the unit will flash between the Red and Yellow LEDs on the side you're turning - super bright, super colorful, super noticeable!

You can't even compare the brightness of this unit to the stock setup. From the factory, you only get 20 LEDs in the stock tail compared to 106! The LEDs you get with the Custom LED R6 Tail are the newest and brightest technology for LEDs. The power draw increase is negligible due to a super efficient design on our part and the fact that LEDs are very efficient to begin with.

The image shows how the tail looks while turning with the running lights on. The tail functions exactly the same when the brakes are applied - except the RED LEDs become much brighter. Please allow time for the image to load fully

Combined blinkers and tail lights for the 2003 - 2005 R6; 2006 - 2007 R6S

MSRP: $150.00
Description: The Custom LED 2003 - 2007 R6 Integrated Tail is designed with the 54 red LEDs as dual intensity for running light and brake light. The 42 yellow LEDs (21 each side) come on for turns only. The system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset to the side you're turning as well, creating an animated effect actually pointing to the direction you're turning.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

2006 - 2008 Yamaha R6 Integrated LED Tail Light Reto Kit

MSRP: $180.00
Description: The new 2006 - 2008 R6 Integrated LED Tail Light Reto Kit (Complete Unit with Clear Lens)

This is an integrated LED tail light COMPLETE PLUG N PLAY unit for the 2006-2008 YZF-R6 tail light. Come pre-wired with the OEM plug harness and installed into a ULTRA smooth new Custom LED tail light housing (the clarity of the lenses on the plug and play units is INSANE!). This enclosed tail light housing comes with a Custom LED circuit board inside containing 32 Ultra Bright Red LEDs and 42 Ultra Bright Yellow LEDs - compared to only 24 red LEDs on the stock circuit board and NO MORE INSTALLING at HOME!

The Custom LED 2006-2008 Yamaha YZF-R6 Integrated LED Tail Light marks the introduction of our Blaster-X technology into our integrated LED tail lights. This technology squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors. It also allows us to utilize less LEDs, thereby maintaining the factory light distribution which was previously not possible.

Just as on the other Custom LED models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions that contain cheap boards, do it the right way from the start, with Custom LED.

NOTE: The "BlasterX" effects feature can be activated via a single toggle switch (switch, tape, connectors, and wire included in our Custom Dynamics exclusive package)

Combined blinkers and tail lights for the 2002-2003 Yamaha R1

MSRP: $150.00
Description: This retrofit is of a 2002/2003 Yamaha R1 Tail. This product allows you to totally remove the rear blinkers on your R1!! All the internals of the stock tail light housing are removed and replaced with a professionally made Custom LED circuit board for your R1.

Instead of the 15 LEDs you get from the factory, the Custom LED solution gives you 36 Ultra Bright Red LEDs and 40 Ultra Bright Yellow LEDs (20 yellow each side in the arrow shape)

The RED LED's are dual intensity for running light and brake light. The Yellow comes on for turns only. The brightness of this unit is amazing - it's almost borderline too bright! But on a motorcycle there's no such thing as too bright, we need all the preventative measures we can achieve.

Not only does this unit clean up the tail section of the R1 by eliminating the need for the stock blinker stalks, but it also makes a lasting impression on anyone who sees it in action. It is awesome. The pictures don't ever do it justice because we haven't found a camera that's capable of handling the amount of light that screams from these LED's.

You will not find another solution out there that gives you 76 of the newest LED technology for ultra-super-crazy bright LEDs.

2004-2006 Yamaha R1 Motorcycle

MSRP: $150.00
Description: Integrated LED Turn Signals (Complete Plug and Play Unit) With Clear Lens 2004-2006 Yamaha R1 Motorcycle
This is an integrated LED PLUG AND PLAY tail light for the stock 2004-2006 YZF-R1. Includes a NEW ultra enclosed tail-light with plug and play wiring harness (the new lenses' CLARITY is INSANE) with a ultra high-tech Custom LED circuit board containing 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 12 red LEDs on the stock circuit board!

The Custom LED 2004-2006 Yamaha YZF-R1 Integrated LED Tail Light marks the introduction of our new Brake Alert safety feature, and Strobe Mode!

Brake Alert automatically provides three quick pulses of light the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!

Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time and overrides all other functions.

Also included is our Blaster-X technology. This technology squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.

Just as on the other Custom LED models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

FEATURE OVERVIEW:
32 Ultra Bright Red LEDs for running and brake lights.
32 Ultra Bright Yellow LEDs for turn signals.
Custom LED Color Chang Technology on-board.
Custom LED Blaster technology on-board.
Custom LED Strobe Mode!
Custom LED Brake Alert!
4Mhz microprocessor controlled operation
Detailed step by step instructions with illustrations for a simple install.
Smart color matched wires matches motorcycle wires for easy wiring.
Only 3 wires to hook up outside of tail light housing.
All electrical connectors and hardware provided with kit.

2002-2007 Yamaha Road Star Warrior & 2008 Raider Integrated LED Taillight

MSRP: $150.00
Description: This is an integrated tail retrofit for the stock 2002-2007 Yamaha Road Star Warrior & 2008 Raider Tail Light. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 16 red LEDs on the stock circuit board.

Just as on the other models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

Integrated LED Taillight for Road Stars

MSRP: $150.00
Description: '05-'07 ROAD STAR MIDNIGHT SILVERADO
'04-'07 ROAD STAR MIDNIGHT
'04-'07 ROAD STAR SILVERADO
'04-'07 ROAD STAR
This is an integrated tail retrofit for the stock Yamaha Road Star, Road Star Midnight, Road Star Silverado and Road Star Midnight Silverado years fitted with the tail light shown. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 16 red LEDs on the stock circuit board.

The system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect. The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

2007 Yamaha YZF-R1 Flush Mount Signals

MSRP: $95.95
Description: Gregg's flushmount housings are CNC machined 6061 aluminum works of art.
Available in Blue, Satin Black, Polished to match your R1.
Clear Lens/Amber LEDs
The lights are 6 chip L.E.D.'s with a 100,000 hour life.
No drilling or grinding required. Simple "bolt-in" installation (instructions included with purchase).

2004-2006 Yamaha YZF-R1 Flush Mount Signals

MSRP: $95.95
Description: Gregg's flushmount housings are CNC machined 6061 aluminum works of art.
Available in Blue, Satin Black, Polished to match your R1.
Clear Lens/Amber LEDs
The lights are 6 chip L.E.D.'s with a 100,000 hour life.
No drilling or grinding required. Simple "bolt-in" installation (instructions included with purchase).

2002-2003 Yamaha YZF-R1 Flush Mount Signals

MSRP: $95.95
Description: Gregg's flushmount housings are CNC machined 6061 aluminum works of art.
Available in Satin Black, Gloss Black, Blue, Red, White, and Polished to match your R1
Clear Lens/Amber LEDs
The lights are 6 chip L.E.D.'s with a 100,000 hour life.
No drilling or grinding required. Simple "bolt-in" installation (instructions included with purchase).

1998-2001 Yamaha R1 Flush Mount Signals

MSRP: $95.95
Description: Gregg's flushmount housings are CNC machined 6061 aluminum works of art.
Available in White, Polished, Red, and Blue to match your R1
Clear Lens/Amber LEDs
The lights are 6 chip L.E.D.'s with a 100,000 hour life.
No drilling or grinding required. Simple "bolt-in" installation (instructions included with purchase).

2007 Yamaha YFZ-R6 Flush Mount Signals

MSRP: $95.95
Description: Gregg's flushmount housings are CNC machined 6061 aluminum works of art.
Available in White, Polished, Red, and Blue to match your R1
Clear Lens/Amber LEDs
The lights are 6 chip L.E.D.'s with a 100,000 hour life.
No drilling or grinding required. Simple "bolt-in" installation (instructions included with purchase).

Hayabusa LED Tail Light

MSRP: $69.98
Description: Suzuki Hayabusa LED Tail LightFeaturing Genesis™ Technology - The Next Generation of LEDs - The Absolute Brightest LED Turn Signal Inserts on the Market Today or Your Money Back Guaranteed! Your 100% Satisfaction with All Genesis LED Products is Guaranteed by Custom Dynamics. Genesis - Its a Whole New World!™
Plug and Play - No Cutting, No Splicing Use your existing Lens and Bucket 96 RED LEDs
Comes w/ 1157 Base attached to all wires
Fits: '99 - '07 GSXR1300 (Hayabusa)
'03 ' - '05 Katana

Integrated LED Turn Signals 2002-2003 Honda CBR-954RR

MSRP: $150.00
Description: Combined blinkers and tail lights for the 2003 - 2006 CBR600RR

This is an integrated tail retrofit for the stock 2003 - 2006 CBR-600RR Tail. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 52 Ultra Bright Red LEDs and 44 Ultra Bright Yellow LEDs - compared to only 12 red LEDs on the stock circuit board!

Just as on the other models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

Integrated LED Turn Signals 2003 - 2006 CBR600RR

MSRP: $150.00
Description: Combined blinkers and tail lights for the 2003 - 2006 CBR600RR

This is an integrated tail retrofit for the stock 2003 - 2006 CBR-600RR Tail. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 52 Ultra Bright Red LEDs and 44 Ultra Bright Yellow LEDs - compared to only 12 red LEDs on the stock circuit board!

Just as on the other models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

Integrated LED Turn Signals2004-2007 CBR-1000RR

MSRP: $150.00
Description: This is an integrated tail retrofit for the stock 2004-2007 CBR-1000RR Tail. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 52 Ultra Bright Red LEDs and 44 Ultra Bright Yellow LEDs - compared to only 12 red LEDs on the stock circuit board!

Just as on the other models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

Integrated LED Turn Signals Ducati 1994-2002

Integrated LED Turn Signals 2005-2007 Triumph Speed Triple

MSRP: $150.00
Description: 2005-2007 Triumph Speed Triple

This is an integrated tail retrofit for the stock 2005-2007 Triumph Speed Triple. All the internals of the stock tail light are replaced with a Custom LED circuit board containing 56 Ultra Bright Red LEDs and 50 Ultra Bright Yellow LEDs - compared to only 20 red LEDs on the stock circuit board.

Just as on the other Custom LED models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

2004-2007 Yamaha R1 License Plate Bracket

MSRP: $57.95
Description: Billet machined construction, function and design from Greggs Customs. Available in polished or black details. Fits the 2004-2007 Yamaha R1.

2002-2003 Yamaha R1 License Plate Bracket

MSRP: $57.95
Description: Billet machined construction, function and design from Greggs Customs. Available in polished or black details. Fits the 2002-2003 Yamaha R1.